Winmax TX30

Below is the direct link to download the Winmax TX30 Stock Firmware (flash file) from GoogleDrive. The firmware contains Flash Tool, Driver, and instructions.

Download


Winmax_TX30_MT6582_MR801_4.4.2_ALPS.KK1.MP1.V2.11.zip

How to Flash

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver, and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed).

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.

Step 7: Green Ring will appear at the end of successful Flash.

See Detailed instruction with images

Important Notes:

[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever anything wrong happens.

Copyright © 2014-2017 - Firmware File